- Band pass powered subwoofer for portable PA and installation applications
- 3,000 Watt power featuring Klark Teknik Class-D technology
- Klark Teknik Digital Signal Processing for total system control
- ULTRANET digital audio networking connects to mixers and other sources
- Double suspension 18″ low frequency driver with inside/outside wound coil
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound.com
- Low distortion dual port design for maximum sound pressure level
- 18 mm (3/4”) birch plywood enclosure with hard wearing semi matt black paint finish
- Integral M10 rigging points for ease of installation
- 35 mm pole mount to support satellite speaker
- Mains input on Neutrik powerCON* connector
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
NuQ118B-AN
The 3,000 Watt NuQ118B-AN is a powered 18″ dual ported bandpass enclosure that is optimally tuned for extended low frequency response. Designed to work individually without a controller, the NuQ118BAN provides very high output FOH performance and is ideally suited for a wide range of music and live sound reinforcement applications.
The NuQ118B-AN features a powerful, double suspension 18″ low frequency driver that utilizes a specialised inside/outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity, and improved efficiency. For its size and operating bandwidth, the NuQ118B-AN delivers extremely high output that is virtually distortion-free – even in the most demanding applications.
Output power for the NuQ118B-AN is provided by means of an efficient and lightweight KLARK TEKNIK 3,000-Watt Class-D power amplifier. A sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive low frequency response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.
On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, crossover alignment and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active subwoofers, or for use with active full range satellite speakers. An onboard USB port provides access for remote control of the NuQ118B-AN via PC computer, as well as DSP firmware updates.
ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.
System
| Frequency Response |
40 Hz – 150 Hz ±3 Db |
| Nominal Dispersion |
Half Space |
| Maximum SPL |
136 dB peak |
| Crossover Type |
Active |
| Transducers |
1 x 18″ (460 mm) LF driver |
| Limiter |
Peak and rms |
Amplifier
| Maximum Output Power* |
3000W |
| Type |
Class-D |
| Protection |
Short circuit, thermal |
Connectors
| Input/link | |
|---|---|
| Sensitivity |
4dBu or 14 dBu software switchable |
| Input impedance |
40 kO balanced |
| Maximum input level |
22 dBu |
| Ultranet input/link |
2 x RJ45 |
| Mains Supply |
Neutrik powerCON 20A† |
Controls
| DSP |
Rotary push-encoder and level control |
User DSP Functions
| Factory EQ Presets |
Positioning, Sound mode |
| Display |
LCD 128 x 32, blue, backlit |
| Delay |
0 – 300 ms |
| Equalisation |
High and low shelving EQ |
| Limiter |
Zero attack input limiter |
| Presets |
20 total presets, 19 user-definablenable |
| Crossover |
Low Pass L-R 24 dB/oct |
| Protection |
Lock-out function for all settings |
Ultranet Digital Network
| Digital processing | |
|---|---|
| A/D conversion |
24-bit, 44.1/48kHz sample rate |
| Converter type |
24-bit, delta-sigma |
| System | |
| Signal |
16 channels |
| Latency |
< 0.9 ms |
| Frequency response |
20 Hz to 20 kHz ( 0 / -3 dB) |
| Dynamic range |
typical 92 dB |
| Cabling | |
| Cables |
Shielded CAT5 |
| Cable length |
max. 246 ft / 75 m recommended |
Power Supply
| Power consumption |
180W @ 1/8 max power |
| Voltage (fuses) | |
|---|---|
| USA / Canada |
120 V~, 60 Hz (T 15 A H 250 V) |
| UK / Australia / Europe |
220-240 V~, 50/60 Hz (T 10 A H 250 V) |
| Korea / China |
220-240 V~, 50/60 Hz (T 10 A H 250 V) |
| Japan |
100 V~, 50/60 Hz (T 15 A H 250 V) |
Enclosure
| Dimensions HWD |
773 x 579 x 700 mm (30.4 x 22.8 x 27.6″) |
| Net weight |
57.9 kg (127.5 lbs) |
| Construction |
18 mm (¾”) birch plywood |
| Finish |
Semi matt black paint |
| Grille |
Powder coated perforated steel |
| Flying hardware |
M10 x 16 points |
Finished in a highly durable semi matt black paint, the cabinet is constructed from 18 mm (¾”) birch plywood and includes: multiple M10 threaded rigging points; a 35 mm pole socket for satellite speaker mounting; integrated carry handles for convenient transport – and high impact interlocking corners for ground stacking stability. Mains power input is provided via a Neutrik powerCON* connector.
Reviews
There are no reviews yet.