Description

The versatile micro amp with built-in iOS interface

What if you could carry in the palm of your hand a guitar amp that had access to virtually any guitar sound you can imagine? And what if you could drive a 4×12″ cab with it with no additional gear needed? Now you can with the new iRig Nano Amp — the first micro guitar amp and interface for the mobile guitarist. iRig Nano Amp is a super-compact battery-powered self contained micro amp and interface for iOS that you can use by itself, with headphones or even an external speaker cabinet — this power-packed amazing little amp can drive up to a 4×12″ guitar cab! But what makes it more versatile than any other micro amp is that it features the iRig circuitry so you can plug your iPhone or iPad into it with the included TRRS cable and tap into the limitless world of AmpliTube guitar tone and more on your iPhone and iPad.

Dual Mode Operation — AMP/DEVICE

iRig Nano Amp operates as a straight up guitar amp and features a British tone stack circuit with gain and volume controls for practice on the go. Simply plug in your guitar to the 1/4″ guitar input, adjust your volume and gain settings, select the output type NORMAL/BRIGHT and rock out anywhere you happen to be. The British tone circuit delivers sparkling clean tones at lower gain settings and a cascading wave of overdrive when cranking the gain to the upper limits.

AMP mode

DEVICE mode

iRig Nano Amp is also an interface and output for your iOS device thanks to its integrated iRig circuit. Use the included TRRS cable to hook iRig Nano Amp in DEVICE mode to your iPhone or iPad and plug in to the amazing toneful world of AmpliTube — the ultimate guitar and bass tone studio — to play, practice and record anywhere, any time. This is great for grabbing ideas in the AmpliTube 4-track looper or recording studio, or just practicing with your favorite AmpliTube gear and more.

When used in DEVICE mode, the internal tone stack circuit is bypassed and the volume knob controls the overall output of the amp. This lets you hear only the processed signal coming from your iOS device with no additional amp coloration. Also in DEVICE mode, the 1/8″ headphone jack is active so you can play/record in the privacy of your own headspace.

Drive a Cab

iRig Nano Amp features a 1/4″ speaker out jack that — get this — can drive up to a 4×12″ cabinet. When you plug in, you’ll be floored by the volume and tonal definition that iRig Nano Amp provides. You can connect an external cab in both AMP and DEVICE modes giving you the most flexibility of any “micro” amp out there.

Portable versatility

iRig Nano Amp is compact — it’s just slightly larger than an iPhone, fits in any gig bag or the palm of your hand and features a handy “kickstand” for tilting back the unit for better monitoring. Inside, iRig Nano Amp powers a 3″ speaker with a 3-watt class A/B power amp. When in Amp mode, you set your overall output volume with the volume control, then dial in just the right amount of saturation and distortion for your playing pleasure.

iRig Nano Amp features a 1/4″ guitar input, a 1/4″ speaker output, an 1/8″ headphone jack, is powered by 3 AA batteries (included) and comes complete with a TRRS cable for connection to an iOS device. It can be used with 3 output monitoring options — with headphones for private practice and recording in DEVICE mode, and with the internal speaker active, or with an external speaker cabinet connected to the 1/4″ speaker out in both DEVICE and AMP modes. When used with headphones or an external cab, the internal speaker can be muted with the volume control knob.

Tap into the limitless guitar tone with AmpliTube

iRig Nano Amp features the famous iRig analog interface circuit for iOS. This means you can use iRig Nano Amp to connect your guitar to your iOS device with the included TRRS cable and tap into the tones of AmpliTube iOS — the leading guitar tone studio app featuring gear from the world’s top manufacturers like Fender®, Orange®, MESA/Boogie® and more! AmpliTube and iRig Nano Amp gives players a complete mobile tone and recording solution.

With iRig Nano Amp in your gig bag, your amp is always close at hand!

Features

Palm-sized guitar amp and interface for iOS
Integrated iRig circuitry for iOS connection
Standalone amp with British tone stack, gain & volume
Connect external speaker cab — up to 4×12″
3-watt A/B power amp
3″ speaker

1/8″ headphone out for use with DEVICE mode
1/4″ Guitar input
Normal/Bright response switch
Integrated kickstand tilting foot
Powered by 3 AA batteries, included
Free versions of AmpliTube iOS available from the App Store

Specs

iRig Nano Amp

Speaker: 1×3″
Amp: 3W class A/B power amp
Input Impedance: 380 kOhms
Output Impedance: can drive cabinets of different impedances – from 8 to 16 Ohms
Instrument Input Connection: 1/4″ Jack
Cabinet Output Connection: 1/4″ Jack
iOS Device Connection: 1/8″ TRRS Jack
Headphone Output Connection: 1/8″ Jack
Power: battery power (3xAA included)
Battery Life: battery life varies by a considerable amount depending on the battery type and amp usage.

Under normal playing conditions and using high quality Alkaline or Ni-MH rechargeable cells, battery life will be approximately 30 hours. In totally idle conditions (amp powered up but not playing) battery life is approx 150 hours, under continuous playing at full power it is about 8 hours.

Important

: the amp switches on when the guitar jack is inserted, so always remember to disconnect the guitar input jack from the amplifier when you are not playing to save battery life.

Package includes

iRig Nano Amp
1/8″ TRRS jack
3xAA batteries

Dimensions

Size: 159mm/6.26″ x 89mm/3.5″ x 45mm/1.77″
Weight: 250g/8.8oz (batteries excluded)

Requirements

Compatible with iPhone 7 Plus*, iPhone 7*, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPod touch (6th, 5th, 4th and 3rd generation), iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation, iPad 2, iPad. iOS 4.3 or later is required.

* Requires use of Apple’s Lightning to 3.5 mm Headphone Jack Adapter (TRRS).

Additional information

Weight	0.3 g
Dimensions	20 × 10 × 10 mm
Hybrid Condensers
Brand	IK Multimedia

Reviews ⁰

Reviews

There are no reviews yet.

Be the first to review “IK Multimedia iRig Nano Amp”

Shipping/Refund Policies

Shipping Policy

Son Sound delivers countrywide (South Africa - not outside the borders of South Africa), at the shipping rates charged in the shopping cart/checkout - depending on the item(s) and order. Please provide your delivery address on checkout. All deliveries will be booked on economy road freight, which means 2-5 business days delivery from date of order - depending on your location.

FOUND A PRODUCT CHEAPER ELSEWHERE?
We are committed to our customers in providing great value, quality, advice and service. We will always endeavor to offer our customers the best price and offer to match any written quote cheaper than our price for the exact same product, not older than 7 days given by a local company (or as advertised on their website), provided that we have such product in stock at that time.

Refund Policy

Due to the vast number of products on our store, it is not possible to keep al prices and availability up to date. Therefore, customers are prompted to first confirm prices and availability before placing an order and making an online payment.

SON SOUND will either give a store credit, exchange or refund on any online purchase within 7 days under the following terms and conditions:

If a product\'s price has changed or not available and an order was placed and paid online without the customer confirming the latest price and availability, SON SOUND will refund the customer the full paid amount MINUS 3.5% up to 5% (depending on the payment method the customer used) - which is the service fee charged by our payment gateway provider.
If the product was delivered and the customer is not happy with the product, the product must be returned at the customer\'s expense, upon which SON SOUND will accept the return provided that the product packaging has not been severely damaged and the product has not been used, installed or show physical damages. Products must be returned in its original packaging. Three and a half percent (3.5%) of the purchase price will be deducted if payment was made online as payment gateway service fee.
Software products cannot be exchanged or refunded.
Products will not be refunded or exchanged due to incompatibility. Please check compatibility information before placing an order.
Credits, exchanges or refunds can only be granted after the product has been returned and inspected (and tested) by trained technical staff to determine if the condition of the returned product grants a credit, refund or exchange. Items cannot be credited, exchanged or refunded before this procedure has been completed. Depending on the product and our supplier, it may take any time from 5-20 working days to process.
A delivery fee will be charged again whenever the product is replaced with the same or another.
If an out-of-box defect can be determined or any defects covered under the manufacturer\'s warrantee, such warrantee will be honored.

SON SOUND adheres to the Consumer Protection Act of South Africa and will base any return on the statutes of the Act.

Cancellation / Return / Exchange Policy

Orders for any product cannot be cancelled once it is processed.
See our Refund Policy for our Return and Exchange policy.

Inquiries

General Inquiries

There are no inquiries yet.

IK Multimedia iRig Nano Amp