I/O Frames can be used to physically locate inputs and outputs connections near their sources and destinations. Dual Gigabit Ethernet connections route the audio signals through the Core for processing. Each I/O Frame can house up to four I/O cards enabling up to 16 channels of input and/or output in a single unit.
Connect to Q-SYS Reflect Enterprise Manager
This peripheral can be automatically connected to your Q-SYS Reflect Enterprise Manager, a powerful monitoring and management platform for the Q-SYS Ecosystem.
Features
Available cards include:
- 4 channels
- Greater than 112 dB dynamic range
- Less than 0.004% THD N
- Phantom power (configured via software)
- 4 channels
- Greater than 112 dB dynamic range
- Less than 0.004% THD N
- 4 channels
- Greater than 114 dB dynamic range
- Less than 0.004% THD N
- Supports dataport amplifiers (CX, PowerLight, PL2, PL3, DCA)
- 4 x 4 Digital audio channels
- Frequency Response /- 0.2 dB
- 4 connectors
- Up to 32 x 32 channels when in a Core
- Up to 16 x 16 channels when in an I/O Frame
- Selectable Latency
Four channels of microphone / line-level analog audio input with 48V phantom power
Four channels of microphone / line-level analog audio input with 48V phantom power and high performance pre-amplifiers and A/D converters
Four channels of balanced, line-level analog output
Four audio output channels (two DataPort connectors) for connection to DataPort-equipped QSC amplifiers
Dynamic Range A-weighted
> 108 dB
> 115 dB
> 115 dB
> 117 dB
4 dBu (nominal input)
Distortion 20 Hz-20 kHz
2 dB below clip (max)
< 0.08% THD N
< 0.06% THD N
< 0.004% THD N
< 0.004% THD N
Inter-channel (max)
Inter-channel (typ)
Intra-channel (max)
Intra-channel (typ)
> 110 dB
> 100 dB
> 110 dB
> 110 dB
> 110 dB
> 110 dB
> 110 dB
> 100 dB
> 110 dB
> 100 dB
> 100 dB
> 110 dB
20 Hz-20 kHz (max)
20 Hz-20 kHz (typ)
± 0.2 dB
± 0.2 dB
± 0.2 dB
± 0.2 dB
Balanced (nominal)
Unbalanced (nominal)
10 k Ohm
10 k Ohm
20 Hz-20 kHz (max)
20 Hz-20 kHz (typ)
> 50 dB
> 50 dB
| Vrms | dBu | dBv | |
| 1 | 0.123 | -16 | -18.2 |
| 2 | 2.25 | 10 | 7.04 |
| 3 | 8.70 | 21 | 18.8 |
| 4 | 17.35 | 27 | 24.78 |
(4 selections)
(continuously variable)
at 48 kHz
at 48 kHz
V rms (max)
dBu (max)
dBv (max)
21 dBu
18.8 dBv
channel mutes
*Group delay assumes that the sample rate converter is enabled.
All specifications are subject to change. without notice.


Reviews
There are no reviews yet.