Get Quick Answers
  • Call The Son Sound Crew... We'll Blow Your Socks Off!
  • Mon - Fri 10:00 - 17:00
  • Favorites
Get Quick Answers
rental-listing-header-1
3xicons
Shop

Turbosound TCS122/64-AN Arrayable 2500 Watt 2 Way 12″ Active Speaker

Call For Price

Found this product at a lower price?

Arrayable 2500 Watt 2 Way 12″ Loudspeaker with Dendritic Waveguide, Klark Teknik DSP Technology and ULTRANET Networking, 60 ° H x 40 ° V Dispersion

Description
  • Arrayable 2 way full range loudspeaker for installation applications
  • Rotatable Dendritic waveguide with 60° H x 40° V dispersion
  • 2,500 Watt power featuring Klark Teknik Class-D technology
  • Klark Teknik Digital Signal Processing for total system control
  • ULTRANET digital audio networking connects to mixers and other sources
  • Glass fibre loaded 12″ low frequency driver with aluminium voice coil for improved transient response
  • Titanium dome 1.4″ neodymium motor compression driver
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • Multiple array configurations for extended coverage
  • Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
  • Architecturally styled powder coated perforated steel mesh grille
  • Mains input on Neutrik powerCON* connector
  • 10-Year Warranty Program*
  • Designed and engineered in the U.K.
 

ATHENS TCS122/64-AN

The 2-way full range TCS122/64-AN is a 2,500 Watt 12″ powered arrayable loudspeaker system that is ideally suited for a wide range of speech and music sound reinforcement applications. Designed to work individually without a controller or in arrays, the TCS122/64-AN provides optimal FOH performance, and offers the flexibility to accommodate venue-specific requirements and install applications.

 

The TCS122/64-AN features a glass fibre loaded 12″ low frequency driver with an aluminium voice coil for improved transient response. The titanium dome 1.4″ neodymium motor compression driver is mounted on a rotatable 60° horizontal by 40° vertical proprietary Dendritic waveguide, which features multiple hornlets with identical path lengths to provide a flat constant-phase wavefront. When the waveguide is rotated 90° from the standard position a 40° horizontal by 60° vertical dispersion is achieved, making the TCS122/64-AN ideal for an even broader range of applications.

 

Output power for the TCS122/64-AN is provided by means of an efficient and lightweight KLARK TEKNIK 2,500-Watt Class-D power amplifier. A sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.

 

On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to: array, position, user EQ control, and signal routing features. In addition to the two combination balanced XLR/jack inputs, an XLR output is provided for daisy-chaining more active loudspeakers or for use with an active subwoofer. An onboard USB port provides access for remote control of the TCS122/64-AN via PC computer, as well as DSP firmware updates.

 

ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

 

Finished in a highly durable semi matt black paint, the trapezoidal cabinet is constructed from 15 mm (5⁄8″) birch plywood – and includes a rugged powder coated perforated steel mesh grille. Multiple rigging points allow bracket mount suspension in any orientation, or mounting with dedicated brackets – available separately. A dedicated range of fly plates and coupler kits are also available separately for constructing tightly packed custom full-range and subwoofer enclosure arrays for aesthetically pleasing and venue specific coverage requirements. Mains power input is provided via Neutrik powerCON* connectors.

System

Frequency response

50 Hz – 18 kHz ±3 dB
45 Hz – 20 kHz -10 dB

Nominal dispersion

60° H x 40° V @ -6 dB points, rotatable

Maximum SPL

131 dB peak

Crossover type

Active

Transducers

1 x 12″ (312 mm) LF Driver
1 x 1.4″ (36 mm) HF Compression Driver

Limiter

Independent HF, LF, peak and rms

Amplifier

Maximum output power*

2500 W

Type

Class-D

Protection

Short circuit, thermal

Connectors

Input/link
Sensitivity

4 dBu or 14 dBu software switchable

Input impedance

40 kO balanced

Maximum input level

22 dBu

Ultranet input/link

2 x RJ45

Mains supply

Neutrik powerCON 20A†

Controls

DSP

Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter

User DSP Functions

Factory EQ presets

Positioning, Sound mode, FBQ

Display

LCD 128 x 32, blue, backlit

Delay

0 – 300 ms

Equalisation

High and low shelving EQ
2 x parametric EQ

Limiter

Zero attack input limiter

Presets

20 total presets, 19 user-definable

Crossover

High Pass L-R 24 dB/oct

Protection

Lock-out function for all settings

Ultranet Digital Network

Digital processing
A/D conversion

24-bit, 44.1 / 48 kHz sample rate

Converter type

24-bit, delta-sigma

System
Signal

16 channels

Latency

< 0.9 ms

Frequency response

20 Hz to 20 kHz ( 0 / -3 dB)

Dynamic range

Typical 92 dB

Cabling
Cables

Shielded CAT5

Cable length

max. 246 ft / 75 m recommended

Power Supply

Power consumption

90 W @ 1/8 max power

Voltage (fuses)
USA / Canada

120 V~, 60 Hz (T 15 A H 250 V)

UK / Australia / Europe

220-240 V~, 50/60 Hz (T 10 A H 250 V)

Korea / China

220-240 V~, 50/60 Hz (T 10 A H 250 V)

Japan

100 V~, 50/60 Hz (T 15 A H 250 V)

Enclosure

Dimensions (H x W x D)

834 x 399.4 x 425 mm (32.8 x 15.7 x 16.7″)

Net weight

27.8 kg (61.2 lbs)

Construction

15 mm (5/8″) Birch plywood

Finish

Semi matt black paint

Grille

Powder Coated Perforated Steel

Flying hardware

M10 x 9, M8 X 8 Points

Additional information
Weight 27.8 kg
Dimensions 85 × 40 × 45 mm
Hybrid Condensers
Brand

TURBOSOUND

Reviews 0

Reviews

There are no reviews yet.

Be the first to review “Turbosound TCS122/64-AN Arrayable 2500 Watt 2 Way 12″ Active Speaker”

Your email address will not be published. Required fields are marked *

Shipping/Refunds

Shipping Policy

Son Sound delivers countrywide (South Africa - not outside the borders of South Africa), at the shipping rates charged in the shopping cart/checkout - depending on the item(s) and order. Please provide your delivery address on checkout. All deliveries will be booked on economy road freight, which means 2-5 business days delivery from date of order - depending on your location.

FOUND A PRODUCT CHEAPER ELSEWHERE?
We are committed to our customers in providing great value, quality, advice and service. We will always endeavor to offer our customers the best price and offer to match any written quote cheaper than our price for the exact same product, not older than 7 days given by a local company (or as advertised on their website), provided that we have such product in stock at that time.

Refund Policy

SON SOUND will either give a store credit, exchange or refund on any online purchases within 7 days from the date of purchase provided that the product packaging has not been damaged in any way and the product has not been used or installed. Products must be returned in its original packaging and proof of purchase must be provided. A ten percent (10%) of the purchase price may be charged as a handling fee on opened or used products, subject to inspection.
Software products cannot be exchanged or refunded.
Products will not be refunded or exchanged due to incompatibility. Please check compatibility information before placing an order. A collection/delivery fee equal to the original Shipping fee will be charged whenever a credit, exchange or refund has been approved. Credits, exchanges or refunds can only be granted after the product has been returned and inspected (and tested) by trained technical staff to determine if the condition of the returned product grants a credit, refund or exchange. Items cannot be credited, exchanged or refunded before this procedure has been completed. Depending on the product and our supplier, it may take any time from 10-20 working days to process.

If an out-of-box defect can be determined or any defects covered under the manufacturer\'s warrantee, such warrantee will be honoured.

SON SOUND adheres to the Consumer Protection Act of South Africa and will base any return on the statutes of the Act.

Cancellation / Return / Exchange Policy

Orders for any product cannot be cancelled once it is processed.
See our Refund Policy for our Return and Exchange policy.

Inquiries

General Inquiries

There are no inquiries yet.